QUANTUM INSTALLATION GUIDE
©2020 Quality Water Treatment. All rights reserved.
29
.
f)
Reinstall the red clips to secure the fittings. Gently tug on the clips to make sure they are locked into
place
(B)
STANDARD PLUMBING CONNECTION TO THE BYPASS VALVE
(If optional Quick-Connect Kit was not provided.)
a)
Wrap Teflon tape onto both elbow fittings.
WARNING:
USE ONLY TEFLON TAPE. Do not use pipe dope or plumbers’ putty. This can
damage the plastic fittings.
b)
Install the two elbow fittings into the bypass valve.
c)
Remove the two red clips from the bypass valve.
d)
Push both elbow fittings into the bypass valve.
e)
Slightly turn the fittings in place.
f)
Reinstall the red clips to secure the fittings. Gently tug on the clips to make sure they are locked into
place.
