4
Step 1. Attach The Seal
Slide the Aboveground Seal over the top of the swivel head and down over the main body as
illustrated in Figure 3. The seal should seat in the groove just above the footpad. Once in place, the
seal should rotate and turn freely.
Step 2. Attach The Bumper Strap
Insert the bottom end of the bumper strap (end closest to the bumper weight) into the slot provided
on the main body. Insert the top end of the bumper into the slot provided in the swivel head. See
Figure 4.
Step 3. Attach The Hose Weight And Assemble The Hose
E-Z Vac’s Hose comes in sections which must
be assembled. You will also have to attach one
hose weight to the end of the third hose section.
See Figure 6.
Figure 3
Swivel Head
Seal
Groove
for Seal
Main Body
Foot Pad
Figure 4
Main Body
Swivel Head
Bumper Weight
Male Hose End
Female Hose End
Figure 5
