horNET P6121-L4 / P6122-12
23
WPS Tab
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the
security setup and management of Wi-Fi networks. Ralink STA as an Enrollee or external
Registrar supports the configuration setup using PIN configuration method or PBC
configuration method through an internal or external Registrar.
WPS AP List
– Display the information of surrounding APs with WPS IE from last scan result.
List information includes SSID, BSSID, Channel, ID (Device Password ID), Security-Enabled.
Rescan
– Issue a rescan command to wireless NIC to update information on surrounding
wireless network.
Information
– Display the information about WPS IE on the selected network. List information
includes Authentication Type, Encryption Type, Config Methods, Device Password ID,
Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands. Details can be
found in
Detailed network information
section.
PIN Code
– 8-digit numbers. It is required to enter PIN Code into Registrar using PIN method.
When STA is Enrollee, you can use
Renew
button to re-generate new PIN Code.
Config Mode
– Our station role-playing as an
Enrollee
or an external
Registrar
.
WPS Profile List
– Display all of credentials got from the Registrar. List information includes
SSID, MAC Address, Authentication and Encryption Type. If STA Enrollee, credentials are
created as soon as each WPS success. If STA Registrar, RaUI creates a new credential with
WPA2-PSK/AES/64Hex-Key and doesn't change until next switching to STA Registrar.
Detail
– Displays Credential information in secondary pane.
Connect
– Command to connect to the selected network inside credentials. The active
selected credential is as like as the active selected Profile.
Rotate
– Command to rotate to connect to the next network inside credentials.
Disconnect
– Stop WPS action and disconnect this active link. And then select the last profile
at the Profile Page of RaUI if exist. If there is an empty profile page, the driver will select any
non-security AP.
Export Profile
– Export all credentials to Profile.
Delete
– Delete an existing credential. And then select the next credential if exist. If there is an
empty credential, the driver will select any non-security AP.
PIN
– Start to add to Registrar using PIN configuration method. If STA Registrar, remember
that enter PIN Code read from your Enrollee before starting PIN.
PBC
– Start to add to AP using PBC configuration method.
Caution:
When you click PIN or PBC, please don't do any rescan within two-minute
connection. If you want to abort this setup within the interval, restart PIN/PBC or press
Disconnect to stop WPS action.
