![Pentagram Cerberus [P 6367] Installation And Operation Manual Download Page 37](http://html.mh-extra.com/html/pentagram/cerberus-p-6367/cerberus-p-6367_installation-and-operation-manual_1524254037.webp)
PENTAGRAM Cerberus [P 6367]
Traffic Control
Traffic Control
Traffic Control is for communication traffic limit in the LAN and WAN. It can support limitation
rules up to 20 entries and simultaneously control maximum of 254 PCs' traffic. In addition, IP
address range configuration is supported.
Traffic Control: To enable or disable the internal IP traffic control. The default is disabled.
Interface: Enter the actual uploading and downloading bandwidth in WAN port.
Service: To select the service type for traffic control, such as HTTP service.
IP Address: The range of IP addresses, it can be a single IP or IP range.
UP/Down: To specify the traffic heading way for the selected IP addresses: uploading or
downloading.
Bandwidth Range: The Minimum/Maximum Uploading/downloading data traffic (KB/s) which
can not exceed the WAN bandwidth limit.
Apply: Check to enable the currently edited rule.
Add: Click Add to list button to add the current rule to the rule list.
Apply: Click Apply to activate the current rule.
Cancel: Click Cancel to drop all settings saved last time.
37