Cerberus P 6331-4A
24
•
PPPoA/PPPoE
Select this option if your ISP requires you to use a PPPoA/PPPoE connection.
Username
– Enter your username for your PPPoE/PPPoA connection.
Password
– Enter your password for your PPPoE/PPPoA connection.
Encapsulation
– Select your encapsulation type from the dropdown list.
Half Bridge
– external IP address obtained from ISP will be transferred to first computer
which will connect to and obtain IP address from router. Only this computer will have
access to internet.
Connection
– Select whether your connection is always on or if it connects on demand
or manually. If on demand, specify how many minutes the connection may be idle before
it disconnects.
TCP MMS Option
– Enter the TCP MSS (Maximum Segment Size) you wish to use here.
Get IP Address
– Choose whether the router obtains the IP address statically or
dynamically.
Static IP Address
– Enter the static IP address here. Only if you chose Static above.
IP Subnet Mask
– Enter the IP subnet mask here. Only if you chose Static above.
Gateway
– Enter the gateway here. Only if you chose Static above.
NAT
– Select whether NAT (Network Address Translation) is Enabled or Disabled.
Default Route
– Select whether this PVC will be the default route for Internet data.
TCP MTU Option
– Enter TCP MTU (Maximum Transmission Unit) Value here.
Dynamic Route
– Select the RIP type and direction from the dropdown lists.
Multicast
– Select the multicast protocol you wish to use from the dropdown list.
•
Bridge
Mode
The modem can be configured to act as a bridging device between your LAN and your
ISP. Bridges are devices that enable 2 or more networks to communicate as if they are 2
segments of the same physical LAN. Please set the Connection type.
Encapsulation
– Select your encapsulation type from the dropdown list.
Summary of Contents for Cerberus P 6331-4A
Page 4: ...Cerberus P 6331 4A 4 ...
