3-11
Chapter 3 Character Input
* Previous Characters and Related Charactesrs
In any continuous text (2 characters), the first character is the second character’s uplink,
while the second character is the first character’s downlink. For example
科技
, where
科
is
技
’s uplink, while the character
技
is
科
’s downlink.
1. When using the mini ScanEYE, the recognition results will be directly transferred to the
desired application.
2. As shown in the illustration, the character
恬
has been recognized incorrectly as
恰
as
well as
科
which also has been incorrectly recognized as
料
.
2. Leave your cursor on the character for 1-2 seconds and a window
showing a list of suggested corrections will be presented.
3. If the correct character appears among the list of characters pre-
sented, you can click on the character to have your current incorrect
character replaced.
5. Lastly, notice that the wrong character has been replaced.
3. Leave your cursor on the character
恰
for 1-2
seconds and a window will pop up listing
possible characters. In the pop up window,
click on the magnet which is facing left
and you will notice another pop up window
which shows you a list of combination which
the system thinks are possible replacements
for the resulting recognition.
4. Leave your cursor on the character
料
for
1-2 seconds, which will once again invoke
the pop up window with the list of possible
replacements. This time round, click on the
magnet which is facing right
and the
very same panel will pop up again with a
list of combination of characters for you to
choose from.
5. After the correct combination, the correct
resulting text will now appear in the result
box.
Note: Only Chinese recognition language provides combination list.
