Installing the door sensors
About this task:
Each door sensor ships with a set of stickers that display a serial code. The serial
code on the stickers matches the serial code on the side of the sensor. Use these stickers to trace
the door sensors.
1. Mount a sensor with or without a bracket to each chiller or freezer room door that you want to
monitor. To secure the sensor, use screws, tie wraps, or double-sided tape.
2. Attach the magnetic strip to the frame of the chiller or freezer room door.
3. Attach a sticker to a visible location on the refrigeration unit.
4. Swipe the sensor once from top to bottom with a magnet and observe the following light
sequence:
- The sensor light turns blue.
- The sensor light flashes green approximately four times.
- The sensor light turns off.
PENN Connected PC10 Commissioning Guide
10
