1)
Place circle on flat surface and place arm at top of
circle.
2)
Place ladder around circle.
3)
Align the rungs of the open end of the ladder to the
circle.
4)
Locate tensioning knobs and place through holes.
5)
Tighten ladder to circle with tensioning knobs.
Rinse after each use with tap water and dry.
Lubricate all pins, hinges and handles with a silicone based
lubricant.
Periodically check locking levers and tighten nuts to keep
grip plates tight.
Hinge
- Pinch hazard
Rung covers
- Coarse grit can scratch bare skin
Ice Teeth
- Sharp points can cut skin
Serial Number Location
- Ladder
Serial Number Location
- Circle
Handle
- Pull out and rotate to re-index
Storage Mode
Maintenance
Warnings
Information
6)
Ladder ready for storage.
