Penguin Computing R270-B2O Technical Manual Download Page 113

Page: 113 / 126

BIOS Setup

- 112 -

There are two types of passwords that you can set:

•

Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

•

User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable
this field, a Administrator Password must first be set. A user can only access and modify the
System Time, System Date, and Set User Password fields.

Administrator Password

Press Enter to configure the Administrator password.

User Password

Press Enter to configure the user password.

Secure Boot menu

Press [Enter] for configuration of advanced items.

5-5 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

Summary of Contents for R270-B2O































































































































Search results

Summary of Contents for R270-B2O

Reviews:

Related manuals for R270-B2O

Brands by name

Popular brands

Penguin Computing R270-B2O, Technical Manual

Search results

Summary of Contents for R270-B2O

Reviews:

Related manuals for R270-B2O

Brands by name

Popular brands