in U-Storage. The action is not reversible. You have to backup all
the important files or data.
2).
There are two steps in Recover Disk, one is scan bad block and the other is “Read/Write”
testing for each block. It will take a long time to scan each block. It will take about 1.5
minutes for each 16 MB.
3).
After you click the [Start] button in the window, the Recover process will be started.
4).
Once the job is finished, the complete message will be shown in the middle area, or else it
will show error message.
Known Problems
Problem 1:
The “Write-Protect” switch can not work on-line on Macintosh computer
with Mac OS 10.1.4.
Warning
If you switch the “Write-Protect” on-line with Mac OS 10.1.4, it
will cause the computer system hang when you do the read or
write operation.
Workaround:
Disconnect the device when you need to switch the “Write-Protect” with Mac
OS 10.1.4. We will solve the system hang-up problem in the near future.
However, due to the OS operation issue, we don’t recommend you switch the
“Write-Protect” on-line.
Problem 2:
In Window2k or Window XP, when user use VIA USB 2.0 host controller
and run resize in U-Storage AP will cause OS reboot or resize function fail.
Solution:
In Windows XP
:
Update USB 2.0 driver from Microsoft Windows Update(usually Windows
XP will update automatically).
In Windows 2k
:
When your OS detect USB 2.0 host controller PCI card or onboard chip at
first time, OS will show new hardware detect and request to direct driver
location, please select Microsoft Windows Update to update from internet,
otherwise if you install VIA driver before, you must update manually follow
below step:
- 27 -
Rev
2
.0
