Pendulum Audio HZ-10SE Operating Manual Download Page 19

Pendulum Audio, Inc. warrants to the first purchaser of a new Pendulum HZ-10SE Preamp System that

the unit is free of manufacturing defects in materials and workmanship for a period of one (1) year from the
date of purchase. Pendulum Audio, Inc.'s  sole obligation under this warranty shall be to provide, without
charge, parts and labor necessary to remedy defects, if any, which appear within one (1) year from the date of
purchase.   All warranties expressed or implied made by Pendulum Audio, Inc., including warranties of
merchantability and fitness, are limited to the period of this warranty.  Pendulum Audio, Inc.  is not
responsible for indirect, incidental or consequential damages arising from the use or failure of this product,
including injury to persons or property.

This warranty does not cover damage due to: misuse, abuse, modification, accident or negligence.  The

warranty does not apply if the unit is repaired or altered by persons unauthorized by Pendulum Audio, Inc. in
such a manner as to injure, in Pendulum's sole judgment, the performance, stability or reliability of the unit. The
warranty does not apply if the unit is connected, installed or used otherwise than in accordance with the
instructions furnished by Pendulum Audio, Inc.

If the equipment requires warranty repair, return authorization must be obtained from Pendulum Audio ,

Inc.  prior to shipment. Equipment should     

not     be shipped to Pendulum Audio, Inc.  until return authorization and

the proper shipping address is obtained from us.  The equipment (with all its components parts and connecting
cables) must be suitably packaged, including a note with the owner's name, address, telephone number and a
description of the reason for return.  You pay two-way shipping (we recommend UPS), and we suggest you insure
your shipment.

This limited warranty is in lieu of all other warranties, expressed or implied, and no representative or

person is authorized to represent or assume for us any liability in connection with the sale of our products than
set forth herein.   This limited warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.

Summary of Contents for HZ-10SE




















Reviews: