Page | 17
e. Make sure that the Wi-Fi option box is set to ON: Touch and slide the block right to enable the
Wi-Fi
connection.
When Wi-Fi is on, the pad will look for and display a list of available Wi-Fi networks.
If a network that you have connected to previously is found, the pad will connect to it.
If you don’t see your network in the list, you can force the pad to re-scan. To scan for networks, tap the
SCAN
icon
that located on the top right corner of the screen.
2. Select an available Wi-Fi network to connect to:
In the same Wi-Fi settings menu above, touch a network in the list.
If the network is open, the pad will prompt you to confirm connection to the network. Touch
Connect
to confirm.
If the network is secured (as indicated by a Lock icon), the pad will prompt you to enter a password or other credentials.
Touch the Wireless password box to show the on-screen keyboard and then use it to enter the password. Touch
Connect
to confirm.
When you have successfully connected to a Wi-Fi network, the Notifications bar at the bottom of the screen will show a
Wi-Fi signal indicator.
To learn about how to add a Wi-Fi network when it is not in range or when the router is set to obscure the network
name (SSID); or to configure advanced Wi-Fi options, please refer to the manual.
Summary of Contents for Pendopad 4.0
Page 1: ......