PEN+GEAR C227-B, Operation Manual

Page: 4 / 5

Protection against
paper jams
and
overheating:
The C227-B is
equipped with
a motor overheat guard.
To
protect the machine
well, we suggest the user
to
operate it in
this way:
work
30
minutes then 20
minutes
off. Under the following conditions,
the
current
feed
to
the unit's
motor is
interrupted:
Continual
operation of the shredder
with maximum
capacity
for
a
prolonged period
of
time, e.g. longer
1.
than 30
minutes
without interruption.
2.
Overrunning the
shredding capacity e.g. adding
more than
16 sheets of paper (75g) in one operation
or
in
the
event the
p
aper
is not inserted length-wise
into the
feed slot.
Under the above-mentioned conditions, the automatic
overheat
guard of the
motor
is
triggered,
whereupon the current
feed to
the
device is
interrupted.
In
such
a
case, please
take the followingsteps
Disconnect
the
main plug
from the
AC
socket
in
order
to avoid the
risk of
serious injuries
and wait
at
1.
least
20
minutes until
the overheat guard has
reset.
Now
tear
off
excess
paper from the top
of the shredder
or remove it.
2.
paper away from the shredding blades. Afterwards,
set
the switch
back
to the
AUTO position.
If
necessary,
repeat
this step.
3.
Reconnect
the
main plug
to the AC
socket and set the switch to the
REV
position.
Pull the remaining
With the switch
in
the
AUTO position and
the open feed slot, you may
now continue the normal
shredding process. Shredder
stops
while shredding
Overloading:
If
you overload more than
16
sheet paper
in
one
time, the machine will
be
reverse automatically, then
remove any excess paper. The machine will then
be reset to
either normal or standby mode.
Bin
Full:
If
the
Bin Full
indicator turn to red,the cutter will
stop
immediately. Should
this happen, then
please pull
out the
bin and dispose
the paper shreds,and place bin back
in.
The machine will then
be
reset to either
normal
or standby mode.
Attention:
This model includes
a
built-in safety interlock mechanism which is
located on the front
of the shredder.
THE SHREDDER
WILL NOT OPERATE WHEN THE BIN
IS
PULLED
OUT !
Never shred envelopes (any window,
insulated or with
glued flaps),adhesive materials(labels,decals/stickers or glued paper), newsprint,
transparencies, laminated documents, continuous
forms, cardboard,
or
hard
and plastic materials
(except
credit cards).
Technical specification:
Voltage:
Power:
Paper
entrywidth:
Shred
size
Shred
paper
capacity:
Shredspeed:
Dimension:
120V-,60Hz
360W
220mm
4*35mm
16
sheets
/
1
Credit Card/
1
CD
1.6m/min
354
243*522mm