5
042281 R03
When using electrical furnishings, basic precautions should always be followed, including the following:
Read all instructions before using the cabinet. Save these instructions.
IMPoRTanT safeTY InsTRUCTIons
DangeR:
To reduce risk of electrical shock:
1. Turn off power before cleaning and maintenance.
WaRnIng:
To reduce the risk of burns, fire, electric
shock, or injury to persons:
1. Power off before putting on or taking off parts
2. Close supervision is necessary when this furnishing
is used by, or near children, invalids, or disabled
persons.
3. Use this furnishing only for its intended use as
described in these instructions.
4. Never operate this furnishing if it is damaged, or
not working properly. Contact technical service for
examination or repair.
5. Never drop or insert any object into any opening.
6. Do not use outdoors
7. Do not operate where aerosol (spray) products are
being used or where oxygen is being administered.
WaRnIng:
Risk of Electrical Shock- This
equipment must be connected only to supply mains
with protective earth. See Grounding Instructions.
WaRnIng:
This product is intended for use by
dental/medical professionals only.
WaRnIng:
Only authorized service technicians
should attempt to service this equipment. Serviced
by other than authorized technicians will void the
warranty.
WaRnIng:
Power cords and their associated
parts cannot be substituted without increased risk
of electric shock or fire. We recommend the use
of Pelton & Crane replacement parts only! Power
cords must be installed by qualified personnel.
Make sure all service loops, strain reliefs, and
cord guards are in place and that line, neutral and
ground wires are secured.
WaRnIng:
Failure to carefully follow the
described procedure may result in damage to the
equipment and/or operator injury.
WaRnIng:
Use only Pelton & Crane
replacement parts. All repairs should be performed
by an authorized Pelton & Crane dealer and/or
their representatives.
WaRnIng:
No modification of this equipment is
allowed
storage Conditions:
-55°C to +50°C
10% to 90% Relative Humidity
This product is designed for use in an indoor, temperature
controlled, office environment.
WaRnIng:
Use a licensed electrician for all wiring.
