Pelsue TFAT-11A Product Manual Download Page 7

#500615-001 - 

Product Manual: Model #TFAT-11A TELESCOPIC FALL ARREST TOWER

 - Revision 01 - Date: 04-29-2010

Page 7

2.0 - Introduction & Product Information

MODEL:

____________________________________________

Serial Number :

______________________________________ 

Date of Manufacture (DOM):

___________________________

Congratulations on your choice of a 

Pelsue Model #TFAT-11A Telescopic Fall Arrest Tower 

to compliment your 

complete fall arrest system. This equipment has been designed and manufactured to exceed fall arrest requirements 
and regulations in order to meet the needs of the discriminating operator for the effi cient and safe working conditions of 
personnel at height.

Safe, effi cient and trouble-free operation and maintenance of the system requires that anyone who will be operating, 
maintaining, or inspecting the equipment, read, understand and follow all of the operation, safety, maintenance, and 
inspection instructions contained within this manual. This manual covers the Pelsue Model #TFAT-11A Telescopic Fall 
Arrest Tower.  Use the Table of Contents as a guide to fi nd specifi c information.

Keep this manual available for future reference and for usage as a tool in the instruction of new operators. Establish a 
regular training program for all operators. Establish a regular maintenance and inspection program to keep the equip-
ment in top condition.

This product is a part of a complete Fall Arrest 
System. The user must read, understand and follow 
the instructions contained in this manual and for each 
component of the total system before using this equip-
ment. Establish an appropriate training, maintenance 
and inspection program for approved users and the 
equipment itself. Failure to follow these instructions 
could result in serious injury or death.

2.1 - Serial Number

Product Serial Number

Always give your dealer the serial number of your Pelsue Fall 
Arrest product when ordering parts or requesting service or 
other information.

The serial number label is permanently embossed with a 
serial number.  The serial number decal will appear as shown 
in 

Figure 2a at the right and is located on the lower portion of 

the tower (see 

Figure 2b).  A space has been provided below 

for the recording of the serial number for future reference.

Figure 2a:

Serial Number Label

#TFAT-11A

Figure 2b:

 

Serial Number Decal Location

SERIAL

NUMBER

LOCATION

Summary of Contents for TFAT-11A

























Reviews: