#124313-001 -
Product Manual: Model #Airpac15, 15-S, 25, 25-S
- Revision 00 - Date: 05-18-2009
Page 11
5.0 - Product Operation
The Pelsue Airpac is built from a high density polyethylene housing, which has a high resistance to chemicals and extreme
temperatures, and internal steel components. The Pelsue Airpac
is specifically designed to be used in conjunction with
the Pelsue #1325 Series & #1400 Series Axial blowers for confined space applications. All specifications, instructions,
and procedures provided within this manual or upon Pelsue Specification Documents are based upon and only valid
for usage with Pelsue accessories. The T.A. Pelsue Company can not verify equipment safety and/or compliance when
utilized with anything other than Pelsue approved confined space accessories.
Hose Canister
-
Pelsue Airpac
General Specifications
• Weight
-
20 LBS.
• Height
-
15-3/4”
• Width
-
10-5/8”
• Length
-
24-5/8”
5.1 - Product Description & Capabilities
The following section will address the capabilities and the general operation of the Pelsue Airpac. The instructions
contained within this section should be adhered to each and every time the product is used. Any person tasked with
installing or operating the piece of equipment should be familiar with these procedures.
Figure #5.1a:
Pelsue Airpac
Stored Hose
Materials & Construction
• Main Structure:
- High Density Polyethylene Housing
• Hardware
- Plated Steel
• Hose
- High Temp Polyester w/ PVC Polymer, Galvanized Spring Steel Helix w/ Nylon Wear Strip
Features:
• Low Maintenance
• Specifically designed to attach & detach with
specified Pelsue axial blowers
• “Spacemaker” versions of the ventilator hoses
allow for a bend for easier entry and exiting
through manholes
model Specifications
• High Retraction Hose - Galvanized Spring Steel throughout entire length of hose
• Collapsible Hose (Spacemaker) - 4’ long collapsible section in 5’ increments
