107077-001 - Product Manual - Model #1590 Axial Construction Heater / Blower - Rev. 05 - 07-01-2015
Page 7
2.0 - Introduction & Product Information
Congratulations on your choice of a
Pelsue Model #1590 Construction Heater / Blower
. The Pelsue Heater / Blower is
specifically designed to provide means of heating ventilated shelters or work areas. Such use includes, but is not limited
to Fire, Police & Hazmat response crews in bio-terror and mass casualty incidents. This equipment has been designed
and manufactured to exceed durability requirements in order to meet the needs of the discriminating operator. Safe,
efficient and trouble-free operation and maintenance of the system requires that anyone who will be operating, main
-
taining, or inspecting the equipment, read, understand and follow all the operation, safety, maintenance, and inspection
instructions contained within this manual. This manual covers the Pelsue Model #1590 Construction Heater / Blower.
Use the Table of Contents as a guide to find specific information.
keep this manual available for future reference if required, and as a tool in the training of new operators.
This product is part of a system intended for usage
in a climate control scenario. The user must read,
understand and follow the instructions contained in
this manual before using this equipment. Failure to
follow these instructions could result in serious injury
or death.
2.1 - Serial Number
Product Serial Number
Always give your dealer the serial number of your Pelsue portable heater / blower product when ordering parts or request-
ing service or other information.The rating and serial number decal is permanently embossed with a serial number. The
serial number decal is located on the control box cover, as shown in
Fig. 2a. The serial number decal will appear as
shown in
Fig. 2b. A space has been provided below for the recording of the serial number for future reference.
Figure 2b:
#1590
Serial Number Decal
MODEL:__________________________________________
Serial Number :_____________________________________
#1590
SERIAL
NUMBER
LOCATION
Figure 2a:
Serial Number
Location
MODEL 1590 CONSTRUCTION HEATER
106985-001
D
E
C
R
G
I E
N
D
I
S
E
I
T
R
F
R
CERTIFIED
USE ONLY PROPANE GAS WITH
AN INLET PRESSURE OF 15-50 PSI,
MANIFOLD PRESSURE: 10.0" W.C.
BURNER INPUT: 45,000 BTU'S
ALTITUDE: 0-5000 FEET (USA)
0-4500 FEET (CANADA)
MINIMUM AMBIENT TEMPERATURE: -20
F
(-29
C)
T.A. PELSUE COMPANY
2500 SOUTH TEJON ST., ENGLEWOOD, CO 80110
ANSI Z83.7a-2007 (USA)
CSA 2.14a-2007 (CANADA)
SERIAL NO. 1590-
MODEL 1590 CONSTRUCTION HEATER
106985-001
D
E
C
R
G
I E
N
D
I
S
E
I
T
R F
R
CERTIFIED
USE ONLY PROPANE GAS WITH
AN INLET PRESSURE OF 15-50 PSI,
MANIFOLD PRESSURE: 10.0" W.C.
BURNER INPUT: 45,000 BTU'S
ALTITUDE: 0-5000 FEET (USA)
0-4500 FEET (CANADA)
MINIMUM AMBIENT TEMPERATURE: -20 F
(-29 C)
T.A. PELSUE COMPANY
2500 SOUTH TEJON ST., ENGLEWOOD, CO 80110
ANSI Z83.7a-2007 (USA)
CSA 2.14a-2007 (CANADA)
SERIAL NO. 1590-
