4
OPERATION
Place the heater on a firm, level surface free from obstructions, and at least 3 ft.
(0.9m) away from any wall or combustible material.
With the Power Switch in the
OFF
position, plug the heater into a grounded
120V outlet. Always operate the heater in the upright position.
To use the fan only function and no heat needed, please push the Power and Setting
Control switch
（
B
）
to
FAN( )
position, the fan inside will work and Power
Indicator Light (
A
) will illustrate.
To turn the heater on, please turn the Power and Setting Control switch (
B
)
clockwise to the desired position
LOW( )
or
HIGH( )
, and turn
Thermostat Control (
C
) to your desired setting from
MIN
to
MAX
.
Symbol
Function
The heater turns off
F
FAN
an working only
The heater operates at 900 watts
The heater operates at 1500 watts
For quicker heat up, you can turn the Power and Setting Control switch (
B
) to
position
HIGH( )
, and turn the Thermostat Control (
C
) to
MAX
, when
the room reaches a comfortable temperature, slowly turn (
C
) counter-clockwise
until the Power Indicator Light (
A
) turns off. This is the point at which the
thermostat setting equals the room temperature and the thermostat will auto
matically turn the heater on to and off to maintain this selected temperature. Then
you can turn (
B
) to position
LOW( )
for energy savin
To turn on the Oscillation feature (
D
), turn the Oscillation switch “ON”.
Note: If the fan was shut off, either because of by pressing POWER to select OFF,
or the unit was turn off automatically for high room temperature, the oscillation
will be off.
g and prevent overheat.
RESET INSTRUCTIONS
This heater is equipped with an internal High Limit Switch which causes the unit to
stop operating in the event the internal temperature exceeds normal operating
temperatures.
IF THE UNIT SHUTS DOWN
1) TURN THE UNIT OFF
2) UNPLUG UNIT AND WAIT 10 MINUTES
3) PLUG IN AND TURN ON
