Pelonis FS40-16CR Owner'S Manual Download Page 2

Read Rules for Safe Operation and Instructions Carefully.

CAUTION

IMPORTANT SATETY INSTRUCTIONS

WARNING

1.Do not leave the fan running unattended.
2.Keep electrical appliances out of reach from Children or infirm persons. Do not let 
them use the appliances without supervision.
3.This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If 
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 
qualified electrician. Do not attempt to defeat this safety feature.
4.If the supply cord is damaged, it must be replaced by manufacturer or its
service agent or a similarly qualified person to avoid a hazard.
5.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless 
they have been given  supervision or instruction concerning use of the appliance by a
person responsible for their safety. Young children should be supervised to ensure that
they do not play with the appliance.
6.When the fan was assembled, the rotor blade guard shall not be taken off anymore

• Prior cleaning unplug the fan.

 The rotor guard shall not be dissembled/opened to clean the rotor blades.

• Wipe the fan enclosure and rotor blade guard with a slightly damp cloth. 

7.WARNING—To reduce the risk of fire or electric shock, Do not use this fan with any
solid-state speed control device.
8.This product employs overload protection (fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace 
the fuse as per the user servicing instructions (follow product marking for proper fuse 
rating) and check the product. If the replacement fuse blows, a short-circuit may be 
present and the product should be discarded or returned to an authorized service 
facility for examination and/or repair.
a) “Do not operate any fan with a damaged cord or plug. Discard the fan or return it to 
an authorized service facility for examination and/or repair.”
b) “Do not run the cord under carpeting. Do not cover it with throw rugs, runners, or 
similar coverings. Do not route the cord under furniture or appliances. Arrange the cord 
away from traffic area and where it will not be tripped over.”

Summary of Contents for FS40-16CR









Reviews: