pellenc Olivion P230 Operating Instructions Manual Download Page 27

OLIVE HARVESTING SHAKER RAKE "OLIVION P230 / T220-300"

48_80300-M

10.1.1.2. LEGAL WARRANTY OF CONFORMITY

Article L.217-4 of the Consumer Code "The seller delivers goods in conformity with the contract and is liable for

defects of conformity existing upon delivery.

The seller is also liable for any lack of compliance resulting from the packaging, assembly or installation instructions

whenever its contractual liability is engaged in this regard or the latter are carried out under its responsibility

Article L.217-5 of the French Consumer Code “Goods are compliant with the contract”:

1. Where they are fit for the purpose normally expected of similar goods and, where applicable:

• If it matches the description given by the seller and possesses the qualities that were presented to the pur-

chaser in the form of a sample or model;

• If it possesses the qualities that a purchaser can reasonably expect given the public statements made by the

seller, the producer or its representative, especially in advertising or labelling;

2. Or, if it has the characteristics defined by mutual agreement of the parties or is fit for any particular purpose

that the buyer made known to the seller and that the latter accepted.

Article L.217-12 of the Consumer Code "legal action resulting from lack of conformity lapses two years after delivery

of the goods".

 

10.1.2. COMMERCIAL WARRANTYPELLENC

10.1.2.1. CONTENT

10.1.2.1.1. GENERAL INFORMATION

In addition to legal warranties, client users benefit from the commercial warranty on products PELLENCcovering the

exchange and replacement of parts recognised as being out of order, due to machining defects, assembly defects

or material defects, whatever the cause.

The warranty is fully integral to the product sold by PELLENC.

10.1.2.1.2. SPARE PARTS

The commercial warranty also covers original PELLENCspare parts, excluding labour and to the exclusion of certain

parts of each product provided at delivery.

10.1.2.2. DURATION OF THE WARRANTY

10.1.2.2.1. GENERAL INFORMATION

PELLENC Products are guaranteed under the commercial warranty as from delivery to the customer for a period

of two (2) years for products connected to a PELLENC battery, and for a period of one (1) year for other PELLENC

products.

10.1.2.2.2. SPARE PARTS

PELLENC Replacement parts replaced under the product warranty are guaranteed under the commercial warranty

as from delivery of the PELLENCproduct to the customer user for a period of two (2) years for products connected

to a PELLENCbattery, and for a period of one (1) year for other PELLENCproducts.

27

Summary of Contents for Olivion P230

































Reviews: