ELECTRIC HEDGE-TRIMMER HELION 2 COMPACT
54_117575-H
5.3. HEDGE-TRIMMING SPEED MANAGEMENT
Speed setting
Your tool is equipped with a speed selection system. This
speed change optimizes the desired quality of work using
the selector on the handle.
Four indicator LEDs on the
handle indicate the selected speed level.
Caution
These indicator LEDs may flash
when the tool approaches the tem-
perature safety threshold.
Note
Reduce the speed to a minimum for greater autonomy or when the lights flash (close to thermal safety stop)
Speed 1 = 1 LED on (3200 cuts / min)
Speed 2 = 2 LEDs on (3400 cuts /
min)
Speed 3 = 3 LEDs on (3600 cuts /
min)
Speed 4 = 4 LEDs on (3800 cuts /
min)
19
