pellenc Excelion 2000 PROFESSIONAL User Manual Download Page 7

Page: 7 / 42

53_13_086A

53_13_087A

53_12_050B

53_13_070A

SAFETY MEASURES FOR THE CHARGER AND THE BATTERY

Refer to the Pellenc tools battery manual.

TRANSPORT OF THE EXCELION 2000 PROFESSIONAL BRUSH CUTTER

SAFETY INSTRUCTIONS

1–

Keep the original packaging for storing the Excelion 2000 Professional brush cutter in the possible event of shipping the tool for

overhaul or repair.

2–

Never carry the machine or the battery by the power cord.

3–

Always release the control trigger to stop the electric motor and ensure the cutting tool is no longer moving before putting the

machine on the ground.

4–

Place metal cutting tool(s) in their original packaging, or place them in their transport bag.

5–

Put the battery back in its original packaging.

6–

Turn the handlebar so that it is aligned with the pole to facilitate the transport of several tools.

7–

Secure the packed machine and battery in the transport vehicle.

1–

A rapid tool release system makes it possible for operators to get away quickly from the tool.

STORAGE OF THE EXCELION 2000 PROFESSIONAL BRUSH CUTTER

1–

Keep the original packaging for storing the machine

2–

Store the machine in a dry place out of children's reach.

3–

Lubricate the output shaft angle during prolonged storage.

EMERGENCY RELEASE OF THE EXCELION 2000 PROFESSIONAL BRUSH CUTTER

Summary of Contents for Excelion 2000 PROFESSIONAL











































Search results

Summary of Contents for Excelion 2000 PROFESSIONAL

Reviews:

Related manuals for Excelion 2000 PROFESSIONAL

Brands by name

Popular brands

pellenc Excelion 2000 PROFESSIONAL, User Manual

Search results

Summary of Contents for Excelion 2000 PROFESSIONAL

Reviews:

Related manuals for Excelion 2000 PROFESSIONAL

Brands by name

Popular brands