Pellas X M-line M350, User Manual, Page: 9 / 36

5
The unique solutions employed in the M line burners include:
• Mesh Furnace System – the system of modular heat-resistant plates forming the furnace
ensures the self-cleaning process through the reciprocating movement of the grate. It is
possible to adjust the stroke depending on the type of fuel burned;
• Hybrid Drive System– Fuel and air are supplied in a synchronized manner i.e. the fuel is
supplied according to the air supply rate and vice versa;
• Cell Feeder System – provides precize dose of fuel at a given burner power. Moreover
provides protection against flashback thanks to the three-section feedeng chamber;
• Overpressure Combustion System –Air is supplied into the combustion chamber at the
central point to increase the flame spin and reduce the backfire.
• Lambda probe –available for all units to improve the combustion process and reduce the
fuel consumption.
PellasX burners are used in households, bakeries, hotels, public utilities, schools and production
halls or warehouses. They are made of heat-resistant acid-proof steel and are equipped in best
quality parts available on the market. The product which you have at your disposal is the highest
quality, most technologically advanced burner available on the market.
*Using oat fuel reduce burner power and result in increased fuel consumption (up to 50%) and
increased ash production.
2.1. Construction of M350 and M500 burners.
Pic. 1. Construction of M350 and M500 burners.
The burner is composed of the following subassemblies:
• combustion chamber consisting of inCrox cast steel grate (1) and ceramic insulation (2);
• blower assembly with steel cover (3) and X.PLUG socket (4) where the controller plug is to
be connected;
• Blowing system (5) located between the blower assembly and the combustion chamber, with
stub pipe (6) where polyurethane pipe from external feeder is to be connected.
The cover of burner does not have any protruding nor sharp parts. It does not threat one’s health.
The temperature of burner’s cover during operation should not exceed 60ºC with exception of places
of raised temperature, i.e. bakery.
ATENTION!
The manufacturer reserves the exclusive right
to implement any modifications in construction
of burner and feeder, its software and wiring,
otherwise it is released from any liability to the
buyer.
1
2
3 4
5
6