B.
Windows using Frame Screws:
On the roomside of vent windows, drill 13/64" diameter clearance holes through the head,
jambs and sill of the frame. Space the holes using the maximum end and on center spacings
as shown on the placement diagram.
Note: On vent casements, place the holes so that they do not interfere with the roto
operator and the latch points on the lock side of the window.
#
%SJMM
DMFBSBODFIPMF
UISPVHIGSBNFBU
BEFHSFFBOHMF
#
.BY
%SJMM
DMFBSBODFIPMF
UISPVHIGSBNF
."9
1-"$&.&/5%*"(3".
'PSQMBDFNFOUPG'SBNF4DSFXT
BOE*OTUBMMBUJPO$MJQT
."9
."9
."9
."9
."9
."9
."9
D.
Windows using Installation Clips:
Install installation clips. Place the clip so
that the lip is facing up and against the
installation fin, at the locations shown in
the placement diagram. Secure the clip
by driving #6 x 5/8" corrosion resistant
screws through the outer two holes of
the three holes shown.
iGSPNFOE
-JQ
YwDPSSPTJPO
SFTJTUBOUTDSFXT
%
C.
Fold out installation fin
to 90°. Be careful not to remove
or tear the fin corners.
Note: If the fin is not at 90°, the window will not line
up correctly on the interior.
$
