Configuring Occupancy Sensor Input
All configuration settings can be made through the Pelican Web App. Each PRX1 will join
the Pelican Web App and will be listed both as a new notification and under
Admin >
Remote Device Config.
1. Select "Sensor Setup" or "Configure" for the PRX1 serial number you would like
to configure.
2. Select "Occupancy" under "Sensor Type".
3. Under "Master" select the thermostat the PRX1 will be communicating the
current occupancy state to.
Optional Activation Delay: You can select a specific number of minutes you want
the PRX1 to wait before the thermostat switches between occupied and
unoccupied mode after the occupancy sensor’s relay has changed state.
Pelican Wireless Systems, 2655 Collier Canyon Rd. Livermore, CA 94551
Phone: 888.512.0490
Email: [email protected] Website: www.PelicanWireless.com
Pelican Wireless Systems.
All Rights Reserved.
For More Information on Pelican Please Visit:
www.pelicanwireless.com