Pelican PAC3/PAC6 Premium Whole House Water Filter &
Advantage Series Salt Free Softener Combo
©
2019
Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Page 1
1
www.pelicanwater.com
(877) 842-1635
Whole House Water Filter Tank Installation
1. Level the Pelican Whole House Water Filter.
Notice:
If the tank is not level, lift the tank straight up 6 inches and tap it on the ground until the tank stands
vertical. The bottom of the tank is round and the boot allows the tank to stand upright.
Figure 7
2. Determine the size and material of your incoming water supply line from the Sediment Filter System
and choose the appropriate plumbing required to adapt to the 1” Male NPT Assembly.
CAUTION:
Do not over-tighten any of the fittings during installation.
Table 2: Bypass Valve Fittings
Note:
The fitting below is designed with a ¼
"
give to allow for proper pipe alignment. It will not leak and
is intended to have some flexibility.
3. Install the fitting onto the inlet and outlet sides of the Bypass Valve. Follow the diagram supplied
with the fitting.
4. Connect the incoming water supply from the Sediment Filter system to the fitting on the inlet
side of the Bypass Valve.
5. Connect the outgoing water supply to the outlet side of the Bypass Valve.
Part
Description
Qty.
1" Plastic Male NPT Assembly:
V3007-04 WS1 Fitting 1" Plastic Male NPT
Assembly (2): O-Rings (2), Split Rings
(2), and Connectors (2)
1
bag
Incoming
Water
Supply
PVC Fitting*
Bypass
1" NPT Assembly
Valve
Whole House
Water Filter
Outgoing
ater to
Softener
W
*Customer supplied,
choose appropriate connection
INLET
OUTLET
O-Ring
Split Ring
Quick
Connec
t Nut
Rev B
