©
2019
Enviro Water Solutions, LLC
3060 Performance Circle, Suite 2, DeLand, FL 32724
Page 6
www.pelicanwater.com
(877) 842-1635
Installation Overview
Figure 1
Pre-Installation
Bypass Valve Installation
Figure 2
The Bypass Valve comes pre-assembled and ready to install with the O-Rings, Split Rings, and Quick
Connect Nuts. Push the Bypass Valve into the head of the Pelican Whole House Salt Free Water Softener
with the unthreaded ends oriented toward the tanks and hand-tighten the Quick Connect Nuts.
Notice:
The bypass valve(s) included with this system are designed for multiple Pelican water systems. This may
result in the arrows on the bypass valve(s) pointing differently than shown. If the arrows on your bypass
valve(s) do not match the diagram, remove the red arrows by pulling them straight up, turn them 180° to
match the drawing, and push them back down onto the stem.
IN
OUT
19"
Outgoing
Water to
House
Sediment
Filter
Incoming
Water
Supply
Salt Free Water Softener/Conditioner
Wall
Wall
T
Quick Connect Nut
Red Arrow
Water Filter Head
Salt Free Water
Softener/Conditioner
INLET
OUTLET
INLET
OUTLET
NS3-6 Rev N —
Pelican NaturSoft NS3/NS6 Salt Free Water Softener/Conditioner
