Pelican MD3200M, Installation Manual

Page: 17 / 64

17
6.2. Selecting MD3200M
If several eDVRs are set with unique ID numbers, they can be controlled with one remote controller. To
select a specific eDVR (MD3200M), Keep pressing the ID button of remote controller until a buzzer
sounds during 2 seconds.
<Note>
Because remote controller ID is sixteen, eDVR will correspond until pressing ID button sixteen times.
6.3. Operable range of remote controller
6.4.
Loading the batteries into remote controller
Remote Controller requires two AAA-type batteries
1. Remove the battery cover
2. Taking care that the poles(+/-)
Are correctly positioned.
3. Replace the battery cover
<Note>
Batteries are not included as a packing accessory