EN 38
INSTALLATION
General
This appliance should only be connected by a registered installer! The
gas connection and the electrical connection must comply with national
and local regulations.
Warning!
This appliance must be earthed at all times.
Installation, maintenance, or repairs should only be carried out by
professionals who are authorised by the manufacturer, as failure to do
so will void the guarantee.
The device should be disconnected from the mains prior to installation,
maintenance or repairs. The device is only disconnected from the
electric power if:
• the main switch of the domestic electrical system is switched off, or
• the fuse of the domestic electrical system has been completely
removed, or
• the plug has been pulled out of the socket.
Faulty parts may only be replaced by original Pelgrim parts. Only those
parts are guaranteed by Pelgrim to meet the safety requirements.
To avoid dangerous situations resulting from any damage to the
connecting cable, this should only be replaced by the manufacturer, the
manufacturer’s service organisation or suitably qualified persons.
Electrical connection
380 - 415 V 3 N~ - 50 Hz
Consult the wiring diagrams on the back of the appliance.
Make the required connections on the connecting block.
This appliance should only be connected in accordance with a
• 3 phases connection (3 N~ 380 V - 415 V / 50 Hz - 3 x 16 A).
Summary of Contents for PF8231WIT
Page 1: ...Anleitung Herd Instructions for use Cooker PF8231WIT...
Page 42: ...DE 42...
Page 82: ...EN 42...
Page 83: ...EN 43...
