EN 36
Removing and cleaning the wire guides
Only use conventional cleaners to clean the guides.
• Remove the screws using a screwdriver.
• Remove the guides from the holes in the back wall.
Removal and reinsertion of the oven door
1. Open the door completely to the horizontal position.
2. Slightly pull up the locking pins on both sides (A) and then tilt them
all the way forward (B).
3. Now slowly close the door until you feel a slight resistance.
4. Then lift the door upwards and pull it out.
To reinsert the door repeat the procedure backwards. If you have
trouble closing or opening the door, check if the hinge grooves are
properly inserted into their slots.
B
A
CLEANING
Summary of Contents for OVP716RVS
Page 1: ...Anleitung Ofen Instructions for use Oven OVP716RVS OVP726RVS...
Page 42: ...DE 42 DE 42...
Page 82: ...EN 42...
Page 83: ...EN 43...
