EN 10
OPERATION
Set the time
When the appliance is connected to the network for the first time, you need to set the time.
The display shows ‘0:00’. The clock runs as long as the combi-microwave is connected to the
network.
1. Press the clock button.
The hours flash in the display.
2. Press the adjustment buttons to set the hours (0-23).
The set hours appear in the display.
3. Press the clock button again.
The minutes flash in the display.
4. Press the adjustment buttons to set the minutes (0-59).
The set minutes appear in the display.
5. Press the clock button again.
The clock is set: the current time appears in the display with a flashing ‘:’.
While cooking a dish, press the
clock
button to view the current time.
Kitchen timer
The kitchen timer gives a signal after reaching the set time.
1. Press the kitchen timer button.
The display shows ‘00:00’.
2. Press the adjustment buttons to set the time (max. 95 min.).
The display indicates the set time.
3. Press the start button.
The set time counts down in the display. When the set time has been reached, the current
time appears again in the display, and you will hear 5 beeps.
You cannot adjust the set time during countdown. Press on the pause/stop button to
interrupt the kitchen timer and set a new time.
Quick start
With one press of the start button you can start the microwave on full power for 30 seconds.
If you press more times on the start button, the time will increase in steps of 30 seconds to a
maximum of 95 minutes.
You can also first press the adjustment button on the left to set a time. Then press the start
button and the microwave will switch on with full power for the set amount of time.
