Pelgrim IK1064F, Manual

Page: 24 / 68

EN 8
Switching on and power setting
The power can be set to 9 different levels. The hob also has a 'boost' setting which is indicated
by a 'P' on the display (see 'Boost'). The front left and rear right cooking zones have a 'Power
Boost' (SP).
1. Place the pan in the middle of a cooking zone.
2. Press the On/Off button.
▷ You will hear a single beep and a '0' will appear in the display
next to each cooking zone. If you don't do anything else, the cooking zone will switch off
automatically after 10 seconds.
3. Press the on/off button for the cooking zone concerned.
4. The '0' next to the selected cooking zone will light up clearly.
5. Using the – and + buttons select the preferred power level. When you select the – button
directly, the cooking zone will be switched on at power level 9.
▷ The set power is visible in the display.
Please note
• If the appliance is connected to 1 phase, not all the zones can be used at the same time. In
this setting, a maximum of 3 zones can be used at once. When 2 zones are in boost or the
right rear zone in setting 9 and another zone in boost, only 2 zones can be used.
• If a different setting is desired or more zones need to be activated, then another zone will
need to be reduced or switched off first. The appliance will beep and the set power level in
the display will start to flash. Then set the zone/zones to a lower setting!
Switching off
Switching off one cooking zone
▷ One cooking zone is switched on. The display shows a power level between 1 and 9,
or "P".
1. Press the button for the cooking zone to be switched off. Set the cooking zone to '0' with
the – button.
▷ The cooking zone switches off. The hob switches off after 20 seconds, if all cooking
zones are set to '0' and no other process is being used.
Switching off all cooking zones
▷ Several cooking zones are active.
1. Press the On/Off button to switch off all cooking zones.
▷ You will hear a beep. All displays are off. The hob is switched off.
OPERATION