EN 8
Switching on the automatic heat-up function
1. The hob is switched on and a pan has been placed in a cooking
zone.
2. Use the + button in the desired cooking zone to select setting ‘A.’
(comes after ‘9.’).
‘A.’ and ‘9.’ flash alternately in the display.
Tip
A quick way of setting ‘A.’ is by touching the - button to set the cooking
zone to ‘9.’ and touching the + button once for setting ‘A.’.
1. Use the + or the - button to set the desired power.
If you select power setting 4, ‘4.’ and ‘A.’ will flash alternately in the
display. Attention! After 10 seconds, the - button works as an off
button).
2. When the pan has reached the desired temperature, the automatic
heat-up function automatically switches off and the cooking zone
continues at the set power.
The below table shows the duration of the automatic heat-up function
for each power setting:
Setting
1
2
3
4
5
6
7
8
Seconds
40
72
120
176
256
432
120
192
Switching off the automatic heat-up function
The hob is switched on. ‘A.’ and the power setting flash alternately in
the display.
1. Touch the - button for the cooking zone.
A different power setting is shown in the display and ‘A.’ stops
flashing.
Or:
2. Select setting ‘9.’.
Or:
3. Touch the - and the + button for the cooking zone at the same
time. The display shows setting ‘0.’, ‘A.’ stops flashing and the
cooking zone is switched off.
Boost
The ‘Boost’ function is used to cook at maximum power for a short
period of time (maximum 10 minutes). The power is reduced to setting
9 at the end of the maximum boost time.
OPERATION
Summary of Contents for IDK785ONY
Page 83: ...DE 23...
