Options
Settings
Setting for rinse aid dosage. The rinse aid dispenser can be
adjusted between 0 (Off) and 5 (High dosage).
0/1/2/3/4/5/TAB
Rinse aid
7.
Increase the rinse aid dosage:
• If the dishes have water marks.
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
When using an all-in-one detergent that contains rinse aid, you can
activate the setting TAB.
Super rinse adds two extra rinses.
On/Off
Super rinse
8.
Activated in the following programmes:
Normal wash
ECO wash
Daily wash
Plastic wash
Lower half wash
Upper half wash
Activate the setting High temperature to improve the dishwashing
results. Energy consumption is slightly increased.
On/Off
High temperature
9.
Activated in the following programmes:
Normal wash
ECO wash
Daily wash
Plastic wash
Quick Pro wash
Lower half wash
Upper half wash
Adjusting the water softener. Read off the appropriate setting from
the water hardness table below.
0-5
6-8
9-11
12-14
15-19
20-24
25-29
30-39
40-49
50
0-9
10-14
15-20
21-25
26-34
35-43
44-52
53-70
71-88
89
°dH
°fH
°dH
°fH
1)
2)
1)
2)
0/1/2/3/4/5/6/7/8/9
Water hardness
10.
Do not forget to put salt in the salt compartment after you have set
the water softener to 1 - 9.
For a water supply with a hardness under 6°dH (9°fH), select 0.
The water softener is deactivated and no salt is needed.
German water hardness scale
French water hardness scale
1)
2)
14
