![Pelgrim GVW200L Instructions For Use Manual Download Page 18](http://html1.mh-extra.com/html/pelgrim/gvw200l/gvw200l_instructions-for-use-manual_1522409018.webp)
EN 14
Filling the rinse aid reservoir
Rinse-Aid indicator
1. To open the dispenser, turn the cap to the "open" (left) arrow and lift it out
2. Carefully pour in the rinse-aid into its dispenser, whilst avoiding it to overflow.
Note:
Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming
during the next wash.
3. Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right)
arrow.
Adjusting the rinse aid reservoir
The rinse aid reservoir has 6 settings. Both the recommended setting
and the factory setting is “4”. If the dishes are not drying properly or are
spotted, adjust the dial to the next higher number until your dishes are
spot-free. Reduce it if there are sticky whitish stains on your dishes or a
bluish film on glassware or knife blades.
Dial to adjust
USING YOUR DISHWASHER
Summary of Contents for GVW200L
Page 1: ...Instructions for use Dishwasher Anleitung Geschirrsp ler GVW200L...
Page 32: ...EN 28...
Page 62: ...DE 28...
Page 63: ...DE 29...