PELEKIS ELECTRONICS
13
ISO9001/2015
Rev. 1.04 April 2019
Programming :
Program method:
Emergency phone (“Redphone”)
GSM Gateway device has on board stored settings which defines its operation mode.
Device can be programmed through 3 different ways and each of the ways program
different settings. Each of the following programming method will be explained in depth on
next pages.
Programming methods:
Emergency phone (―Redphone‖).
Conventional telephone device.
iOS / Android Mobile Application
SMS messaging (Restricted Access ).
GSM Gateway device is able to fully communicate with Emergency Phone
(Redphone) in order to make a full Voice Call Progress operation.
Redphone uploads the 4 stored emergency numbers to the GSM device in order,
the last one, to take full control of the Call Progress operation.
The above means that GSM device recognizes whether connection is established or
disconnected. Also it can figure out that SIM Card is out of credits or connection can
not be established because of weak signal.
When GSM device manage the Call Progress operation then several Call tries should
be conducted until a reliable connection established to the first available
Rescue Service number.
Available programming ability is fully described on Redphone manual (INTD0900).
