PELA 70278, Quick Start Manual

Page: 6 / 10

Contact
PELA Tools
Solängsvägen 13
SE-513 70 Borås
Phone: 033-202650
E-mail: order@pelatools.com
Environmental protection /
Scrapping
Recycle any unwanted material,
do not throw it in the household
rubbish. All machines, accessories
and packaging must be sorted and left
at a recycling center and disposed
of in an environmentally friendly
manner.
Save this manual
You will need this manual for safety information,
assembly, operation and list of machine parts. Sto -
re it in a dry place for later use.
READ ALL INSTRUCTIONS BEFORE INSTALLING
AND USING THE BEADING MACHINE.
Safety instructions
1. KEEP THE WORKING SURFACE CLEAN. Messy
work surfaces invite accidents.
2. HAVE NO CHILDREN NEARBY. Children should
be kept away from the work area. Do not allow
them to use the tool.
3. DO NOT USE THE TOOL IF YOU ARE AFFECTED
BY ALCOHOL OR DRUGS. Read the warning
labels and prescriptions for any medicines you
are taking to determine if it is appropriate for
you to handle the machine. If you are unsure,
do not use the machine.
4. AVOID TOUCHING MOVING PARTS WHEN
USING THE TOOL. Keep fingers and hands
away from gears, rollers, profile wheels and all
other moving parts.
5. USE EYE PROTECTION. Always wear approved
goggles. Buy goggles from your tool supplier.
6. DRESS SAFELY: Always wear protective gloves
and shoes with anti-slip protection when
working with sheet metal, materials with sharp
edges and when using the beading machine.
Do not wear loose clothing and jewelry. They
can get caught in the moving parts. Also use
protection for the hair, cap and / or hair net, so
that long hair does not get stuck in the
machine.
7. DO NOT STRETCH. Always have a stable
balance and good placement of the feet.
8. ALWAYS BE TWO PEOPLE. Two people are
needed to operate this machine safely. One
person is needed to feed the plate, while the
other person cranks the beading machine.
Part # Description Qty
1 Upper part of the beading
machine
1
2 Handle 1
3 Profile wheels (6 pairs) 12
9. BE AWARE. See what you do. Use common
sense. Do not use the tool when you are tired.
10. MAX 1.25 mm sheet. Do not use the beading
machine on sheets thicker than 1.25 mm.
11. SPARE PARTS AND ACCESSORIES. When
servicing, only identical parts may be used for
replacement. Use only accessories provided for
this tool. Buy goggles from your tool supplier.
12. STORAGE OF THE MACHINE WHEN IT IS NOT
USED. When not in use, store in a dry place to
avoid rust. For safety reasons, the shell of the
machine must be kept locked, out of the reach
of children.
Before you start assembling the machine:
While mounting the machine, attach it to a
standard vise. Also make sure that the vise is
properly screwed on.
Assembly
WARNING: The sheet beading machine is heavy.
Be two people when you lift and move the machine.
1. Place the beading machine (#1) in a vise shown
in Figure 1. Secure it in the vise.
2. Mount the Handle (#12) on the drive shaft (#3).
3. Use a wrench to tighten the bolt (# 11)
securely. Make sure that the bolt (#11) is
against the flat part of the drive shaft (#3).