11
1,
2,
3,
5,
4,
3. Instructions for use
3.1 Instructions for mounting filters
1. Open the top cover
2.
Install primary filter;
3.
Install intermediate filters;
4.
Install pre-filter;
5.
Install fire protection filter (top of pre-filter)
6. Lock with hasp on each side.
3.2 Instructions for mounting the extraction arm
Install the extraction arm on the extraction nozzle
on the cover as the picture below demonstrates:
Rotate the extraction arm and point the nozzle at
the area where smoke extraction is required. Adjust
the distance if necessary so that it is within a suita-
ble distance from the work surface.
Note: An aluminum nozzle is always included with
the extraction arm. Check that it is included in the
delivery. This can withstand temperatures up to
1000 degrees C
Note: Adjust the extraction arm so that the pipe is
as straight as possible or slightly bent, large bends
reduce capacity. Nozzles must be directed towards
the work area and within a distance of 150 mm.
Note: The machine should not be used in well-venti-
lated areas, this reduces capacity.
