pela tools 506799, Manual

Page: 20 / 36

Service, repair and spare parts
All maintenance and repairs must be carried out by
a qualified and qualified service workshop. Always
unplug the machine before performing any
maintenance or service. Only original parts may be
used for any repairs.
Storage
If the machine is to be stored unused for a long
time, disconnect it from the electrical outlet, make
sure that parts that can be damaged by dirt are
properly protected, and lubricate parts that can be
damaged if they dry.
General safety instructions
These operating instructions must be considered
as part of the tire balancing machine and must
always be kept with it. If the machine is sold, the
operating instructions must be handed over to the
new owner. Always keep the operating instructions
in a place that is easily accessible to the operator
and ensure that they are kept in good condition.
Carefully read the operating instructions before
starting the machine and always use it if there is
any doubt about its operation.
The operating instructions contain important
information concerning your safety. Follow the
instructions carefully to avoid the risk of injury to
people and to the equipment. In addition, there is
useful information that will facilitate the use and
maintenance of the machine.The manufacturer
disclaims all liability for personal injury or property
damage that occurs due to failure to follow the
safety instructions, if any change or modification is
made to the machine or if non-original spare parts
are used. In addition, the warranty on the machine
is canceled.
Children and persons with physical disabilities or
mental ability may not use the product without
supervision in accordance with EN 60335-1 / A2:
2006.
Safety instructions
• Keep the work area clean, dry and well lit.
Cluttered, damp and dark areas invite
accidents and therefore injury.
• Keep children and spectators at a safe
distance from the machine. Children should
absolutely NOT use the machine or stay within
the work area.
• Make sure that no dangerous situations arise
when working with the machine, that the work
area around the machine is free of objects that
could possibly pose a danger, and that there is
no oil (or other sticky material) on the floor that
could pose a danger to the user.
• Immediately stop the machine in the event of
uneven operation and contact a qualified
service workshop.
• Only a qualified person with good education
and knowledge of the machine’s function may
use it.
• Wear a dust mask and goggles, as well as
suitable work clothes, safety shoes and work
gloves that are suitable for this type of work.
• Wear suitable clothing. Do not wear loose
clothing and do not wear jewelry. Use hair
nets if you have long hair. Be sure to keep hair,
clothing and gloves away from moving parts.
Loose clothing, jewelry and long hair can get
caught in moving parts.
• Attention. Look at what you are working on and
use common sense when using the machine.
Do not use the machine if you are tired or under
the influence of drugs, alcohol or medicines. A
moment of not paying attention can be enough
to seriously injure you.
• Attention. Look at what you are working on and
use common sense when using the machine.
Do not use the machine if you are tired or under
the influence of drugs, alcohol or medicines. A
moment of inattention can be enough to
seriously injure you.
• Use the right product for the right work. Do not
force the machine. Use the machine only for
the type of work for which it is intended. The
right machine makes work better and safer.
• Maintenance. Service and maintenance may
only be performed by a qualified service
workshop.
• Spare parts and accessories. Use only original
spare parts and accessories when servicing
and repairing the machine.
• Storage. When the machine is not in use, tools
and equipment must be stored in a dry place to
prevent rust. As soon as the machine is not to
be used for a long time, disconnect it from the
electrical outlet.
Specifications
Max. wheel weight ........................................... 65 kg
Power supply ..................... 230V / 50 Hz 200 watts
Balancing accuracy ........................................... ± 1 g
Rotation speed .......................................... 200 r.p.m
Position precision ............................................ 2, 81°
Rim diameter ...................... 10 ”-24” (256 - 610 mm)
Rim width ............................ 1.5 ”-20” (40 - 510 mm)
Driving time ....................................................... 8 sec
Noise level during work ................................. <70 dB
Working temperature range from ............. +5 - 50 °C
Humidity ........................................................... ≤ 85%
Size ........................................ 960 x 760 x 1160 mm
Net weight ....................................................... 105 kg