13
Owner’s manual
EN
3. Carefully route the camera cable connector through the
hole and insert the camera into the hole.
4. Wire the cables as indicated on below illustrations
(Important: pay attention to the set you have purchased.
Perform connections according to wiring cables in
your set). Make a permanent connection using a crimp
connector or by soldering etc. Please note the are two
different methods of connecting the camera:
•
connect the video output cable (2) to video input on
your vehicle’s monitor (1), and connect the red cable
(3) to power (+12 V).
•
connect the video output cable (2) to video input
on your vehicle’s monitor (1), and connect the red
cable (5) to power (+12 V) and black cable (6) to GND
(recommended method).
1
2
3
4
5 6
1
2
3
4
5 6