Peiying PY-BT01, User Manual

Page: 4 / 24

Charge the battery
This device has a Rechargeable Lithium Polymer Battery 3.7V, 700mAH battery.
1.
Connect the car kit to the car charger. The red indicator light is displayed
during charging. If charging does not start, disconnect the charger, plug it
again, and retry. Charging the battery fully may take up to 2-3 hours.
2. When the battery is fully charged, the red indicator light turns off. Disconnect
the car kit from the charger.
The fully charged battery has power for up to 5-6 hours of talking time or up to
250 hours of standby time. However, the talking and standby time may vary
when used with different mobile phones, products that use a Bluetooth
connection, usage settings, usage styles, and environments.
Low battery prompt
If the voltage of battery is lower than 3.4v, the red LED flashes every 5 seconds,
the speaker makes “dudu” sound every 30 seconds and the there is a voice
prompt “Battery low”. When the voltage of battery is lower than 3.2v, the car kit
powers off automatically.
Power on and off the car kit
To power on, in power off state, press and hold the "MFB" multi-function button
for about 3 seconds until the blue LED is on. Release the button, the speaker
makes “du” sound and there is a voice prompt “power on”. The car kit now
powers on and enters idle state.
To power off, in power on state, press and hold the "MFB" for 6 seconds until the
speaker makes “dudu” sound and there is a voice prompt “power off”. The red
LED flashes once.
Pair the car kit with a compatible phone
1. Make sure your car kit is power off
2. Press and hold the "MFB" until the blue and red light flashes alternately, the
speaker makes long “du” sound and there is a voice prompt “paring
phone. Please put your phone in paring mode and enter PIN code 0000”. The
car kit is now in pairing state.
3. Activate the Bluetooth feature on the phone, and set the phone to search for
Bluetooth devices. Check the user guide of your phone for instructions.
4. Select the car kit (BCK08) from the list of found devices.
5. Enter the pass code 0000 to pair and connect the car kit to your phone. In
some phones you may need to make the connection separately after
pairing. See the user guide of your phone for details. You only need
to pair the car kit with your phone once.
If the pairing is successful, the blue LED flashes once, the speak makes “du”
sound and there is voice prompt “Pairing successful”. The car kit’s name appears
in the phone menu where you can view the currently paired Bluetooth devices.
WWW.PEIYING.PL 2
PY-BT01