Peiying PY-2C127, Owner'S Manual

Page: 10 / 28

10
Owner’s manual
EN
SPEAKER
Speaker connecting terminals.
FUSE
Standard automatic fuse, you must use the same power fuse if you need to change it.
+12V
Anode of power connection terminals. Connect to the anode of car battery.
REM
Terminal to be connected with remote cable, which comes from the source and which con-
trols the amplifier switching on. Applied voltage must be between 10 and 15 VDC.
GND
Ground terminal. Connect to the car chassis. Keep the length of the ground cable to a mini-
mum.
8
9
10
ELECTRICAL CONNECTION
+12V REM GND
Connect to +12v of battery with
appropriate fuse VALUE.
Connect to remote turn-on lead of
source unit.
Connect to chassis
ground of vehicle.
SPECIFICATION
RMS power @ 14.4V DC
Power @ 4ohms 80W x2
Power @ 2ohms 120W x2
Bridged Power @ 4ohms 200W x1
Minimum speaker impedance 2ohm
THD distortion 0.01%
Frequency response 20Hz ~ 20KHz
Input sensitivity 0.2V ~ 6V
Input impedance 10K
Signal to noise ratio 98dB
Channel separation 50dB