_______________________________________________________________________________________________________________
Seite 2
peiker acustic GmbH & Co. KG
, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897
phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369
Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer
Ein Unternehmen der peiker Firmengruppe
Conformity to CE directives:
CE 0681
Conformity to FCC-Rules:
The following passages will be inserted in the vehicle’s user manual at the appropriate positions where
radio based components are described:
This device
FCC-ID: QWY-BT-PSC-N
IC: 6588A-BTPSCN
RF exposure:
Statement according FCC part 2.1091:
This equipment complies with FCC RF radiation exposure limits set for an uncontrolled environment as
per section 2.1091 of the FCC rules
USA only:
Statement according to FCC part 15.19:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Statement according to FCC part 15.21:
Modifications to this device not expressly approved by this company could void the user’s authority to
operate the equipment.
Statement according to FCC part 15.105:
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the user manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Statement according to FCC part 15.27:
With this device will no additional special accessories be shipped or marketed. This equipment BTPSC
has to be assembled by professional installing personnel of the vehicle manufacturer.
It is the responsibility of the installer to install the equipment in that way that the resulting system
complies with the regulations.
Canada only:
Statement according to RSS-210:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Modifications to this device not expressly approved by this company could void the user’s authority to
operate the equipment.
