GB
GB - 1
1.1 Application
The Multi Control Centre (MCC) is used to carry out switchings centrally and display the switching
status in a PHC system.
A connection to a PHC control
(version 2.24 onwards)
is required.
• A multifunction module with 32 inputs and 30 feedback signal
• LCD display with background lighting (160 x 128 pixel black / white)
• 8-button tableau with status LED
• Meteorological Station 940 WES interface
• On/off control for temperature (internal temperature sensor)
• Alarm signal
• Rotary switch / enter button and back button
Caution
!
New setup Version 2.54 MCC Edition
The PHC system software is required for programming!
Notes:
– Detailed expert knowledge for programming a PHC system are required.
– Read through the operating instructions carefully before putting the device into service.
General
1. General
