Pego ECP200 Expert d7.5, Use And Maintenance Manual

Page: 3 / 36

ECP200 BASE 2/4
Page 3
USE AND MAINTENANCE MANUAL
Rev. 01-09
INTRODUCTION
Page 4 1.1 General
Page 4 1.2 Product ID codes
Page 5 1.3 Overall dimensions
Page 5 1.4 Identification data
INSTALLATION
Page 6 2.1 Important information for the installer
Page 6 2.2 Standard assembly kit
Page 7 2.3 Installing the unit
FUNCTIONS
Page 8 3.1 ECP200 BASE panel functions
TECHNICAL CHARACTERISTICS
Page 9 4.1 Technical characteristics
Page 10 4.2 Warranty
PARAMETER PROGRAMMING
Page 11 5.1 Control panel
Page 11 5.2 Frontal keypad
Page 12 5.3 LED display
Page 13 5.4 General
Page 13 5.5 Key to symbols
Page 13 5.6 Setting and displaying set points
Page 14 5.7 Level 1 programming
Page 15 5.8 List of Level 1 variables
Page 16 5.9 Level 2 programming
Page 16 5.10 List of Level 2 variables
Page 18 5.11 Switching on the ECP200 BASE electronic controller
Page 18 5.12 Compressor activation/deactivation conditions
Page 18 5.13 Manual defrosting
Page 19 5.14 Hot gas defrosting
Page 19 5.15 Pump down function
Page 19 5.16 Password protection
OPTIONAL KITS
Page 20 6.1 TeleNET monitoring / supervision system
Page 21 6.2 ALARM RELAY / TeleNET switching
TROUBLESHOOTING
Page 24 7.1 Troubleshooting
ALLEGATI / APPENDICES
Page 23 A.1 EC declaration of conformity
Page 24 A.2 ECP200 BASE 4 wiring diagram
Page 25 A.3 ECP200 BASE 4A wiring diagram
Page 26 A.4 ECP200 BASE 2 wiring diagram
Page 27 A.5 ECP200 BASE 2A wiring diagram
Page 28 A.6 Connection example (1) - ECP200 BASE4 /BASE4A
Page 29 A.7 Connection example (2) - ECP200 BASE4 /BASE4A
Page 30 A.8 Connection example (3) - ECP200 BASE2 /BASE2A
Page 31 A.9 Connection example (4) - ECP200 BASE2 /BASE2A
Page 32 A.10 TeleNET network connection diagram
Page 33 A.11 SCHINT230 OPTIONAL KIT
Page 34 A.12 SCHINT230 OPTIONAL KIT wiring diagram
CONTENTS
CHAP. 1
CHAP. 2
CHAP. 3
CHAP. 4
CHAP. 5
CHAP. 6
CHAP. 7