Your Guide to the installation,
care and maintenance of
PERFORMA
Danum and
Danum DCD
Pegler Limited, St. Catherine’s Avenue, Doncaster. DN4 8DF
Telephone: 01302 560560 Fax: 01302 367661
Deck Sink Mixers
1. Remove backnuts from tails and fit tails through taps holes of bath ensuring base
rubber is trapped between bath and fitting. Tighten backnuts.
2. Ensure pipework is thoroughly flushed to remove debris before connecting to water
supplies.
Sink Pillar Taps
1. Remove backnut from tail
2. Fit tap through ware ensuring ‘O’ ring or anti rotational washer is positioned
between flange base and ware. Tighten backnut. It may be necessary to install a poly
washer (not supplies) between ware and backnut.
3. Ensure pipework is thoroughly flushed to remove debris before connecting to water
supplies.
CARE AND MAINTENANCE
To maintain the surface finishes, simply wipe occasionally with a mild detergent on soft
damp cloth Dry using soft cloth, never use abrasive cleaners or chemical household
cleaners, avoid contact with concentrated bleach. Traun products are manufactured to
the highest standards and should require little or no maintenance. In the unlikely event
of any spare part requirements, please contact your nearest stockist or the Pegler Sales
Office,
St. Catherine’s Avenue, Doncaster, DN4 8DF, telephone; 01302 560560
DANUM KITCHEN SINK MIXERS
5150 kitchen pillar taps
5525 mono sink mixers
5526 mono sink DCD
5521 deck sink DCD
5522 deck sink mixer + DCD
5150
5521
5522
5526
5525
