Pegatron M2N-VM/S, Manual

Page: 76 / 90

2-30 Chapter 2: BIOS setup
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full
Speed (12 Mbps). Configuration options: [Full Speed] [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
Allows you to configure the BIOS EHCI Hand-Off.
Configuration options: [Disabled] [Enabled]
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]
Device #1 Netac
Emulation Type [Auto]
USB Mass Storage Device Configuration
Number of seconds
POST waits for the
USB mass storage
device after start
unit command.
USB Mass Storage Reset Delay [20 Sec]
Allows you to configure the USB Mass Storage Reset Delay [20 Sec].
Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec].
Emulation Type [Auto]
Allows you to configure the Emulation Type. Configuration options: [Auto] [Floopy]
[Forced FDD] [Hard Disk] [CDROM]