18
Basic Adjustment
Mechanic level
Adjusting the fabric edge
Always turn off the power, unplug the machine and then
well-qualified technicians should adjust the fabric edge.
1. Loosen screws
1
.
2. To make a standard adjustment, move table board
3
as required in the direction of arrow
A
and then
align end
2
of the guide with the center of the slot
on the needle plate (see the illustration).
3. If the fabric edge protrudes from the seams
produced by the left needle, move the end of the
guide slightly in the direction of arrow
B
.
If the fabric edge retracts into the seams produced
by the left needle, move the end of the guide
slightly in the direction of arrow
C
.
The following adjustments should be made if the fabric edge protrudes from or retracts into the seams
produced by the left needle.
The fabric edge protrudes from the seams.
The fabric edge retracts into the seams.
2
B
C
A
1
3
C
C
A
A
U
U
T
T
I
I
O
O
N
N
41
42
43
44
45
46
47
48
