Pegasus PHDVR, Installation & Operation Manual

Page: 25 / 86

25
H.264 DVR - Installation/ Operation Manual
DST Set
It will be available either by Day or Date. When user press ‘User Define’, available country will be
shown. then select Start & End Time and Offset as well. At last, press ‘Apply’ to save the figures.
NOTE
PLAYBACK FOLLOWING TIME CHANGE
The DVR uses the time and date to index video on the hard disk drive so you can find it later.
Changing the time can cause the DVR to work improperly when you try to play back video. If you set
the hour ahead, this is not a problem. But, if you set the hour back, there will be more than one
recording at the same time.
Such as during the October Daylight Saving Time changeover, if you try to search for video between
1 a.m and 2 a.m, the recorder may not operate properly because there will be two hours of recorded
video during this time period. To view video during this overlapping time period, you must start
playback before 1 a.m, then recorder will play both hours between 1 a.m and 2 a.m.
You cannot do a backward search through the overlapping time . But, you can do forward search.
-Video Type : NTSC vs PAL
Video Type is able to set by software, it can be simply done in this menu without rebooting or
initialization.
- System ID
It is used when user use IR remote controller to control more than 1 DVR. It is designed to prevent
the same series of DVR works together in 1 IR remote controller at the same time. If user set each ID
in both IR remote controller and DVR, the IR remote controller only work with same ID of DVR.