7
D. TURNING ON THE PEGASUS AQUA MRET ACTIVATOR
1st Step: Fill up the Cold Water Jug with clean drinking water.
Take Care not to exceed the water level beyond 2000mL mark.
Place the MRET Activator Device to sit on top of the Water
Bottle.
2nd Step To turn on the MRET Device:
Press and Hold for 3 to 4 seconds to put the MRET Device on
standby Mode. (The device will beep 3 times and the button
will light up Solid RED)
TO ACTIVATE THE MRET DEVICE
While the Device is in Standby mode (Solid Red):
For 30 minutes MRET Activating Cycle Time:
Single Click on the Button Once — MRET Activator Resonance System
will Start with one Beep sound and the Button Light will continue to
Flash in Blue Light for 30 minutes
For 60 Minutes MRET Activating Cycle Time:
Double Click the Button
MRET Activator Resonance System will Start with two beep sound and
the Button Light will continue to Flash in Green Light for 60 minutes.
At the end of the cycle time, the MRET Device will beep 6 times and
return to its standby mode. The Button Light will be in Solid Red.
Then it will auto shut down automatically, after 2 minutes of inactivity.
The MRET Activated water is now ready for consumption.
